采用电芬顿-磁固定化菌株耦合体系治理苯酚废水的研究

为实现对苯酚废水治理工艺的优化,针对传统包埋法制备固定化细胞的工艺方法进行改进,选用磁性纳米颗粒制备磁固定化细胞,将其与电芬顿法结合构建耦合体系,利用耦合协同作用实现催化剂的重复利用,并依托微生物的良好降解性能与稳定性提高苯酚降解率,进一步实现对苯酚废水治理工艺的系统优化。     

Modeling of a sequencing batch reactor treating municipal wastewater using multi-layer perceptron and radial basis function artificial neural networks

A sequencing batch reactor was modeled using multi-layer perceptron and radial basis function artificial neural networks (MLPANN and RBFANN). Then, the effects of influent concentration (IC), filling time (FT), reaction time (RT), aeration intensity (AI), SRT and MLVSS concentration were examined on the effluent concentrations of TSS, TP, COD and NH₄⁺-N. The results showed that the optimal removal efficiencies would be obtained at FT of 1 h, RT of 6 h, aeration intensity of 0.88 m³/min and SRT of 30 days. In addition, COD and TSS removal efficiencies decreased and TP and NH₄⁺-N removal efficiencies did not change significantly with increases of influent concentration. The TSS, TP, COD and NH₄⁺-N removal efficiencies were 86%, 79%, 94% and 93%, respectively. The training procedures of all contaminants were highly collaborated for both RBFANN and MLPANN models. The results of training and testing data sets showed an almost perfect match between the experimental and the simulated effluent of TSS, TP, COD and NH₄⁺-N. The results indicated that with low experimental values of input data to train ANNs the MLPANN models compared to RBFANN models are more precise due to their higher coefficient of determination (R²) and lower root mean squared errors (RMSE) values.     

高炉渣对Cd~(2+)的吸附性能

采用包头钢铁集团炼铁厂的高炉渣为吸附剂(粒径0.154 nm)对Cd2+进行吸附,运用SEM技术对吸附剂进行了表征,研究了初始Cd2+质量浓度、吸附剂加入量、吸附时间、吸附温度和废水pH对Cd2+去除率的影响,并探讨了吸附机理。表征结果显示:高炉渣吸附剂具有疏松多孔的特点,表面十分粗糙,比表面积较大。实验结果表明:当吸附温度为室温(28℃)、废水pH为7、初始Cd2+质量浓度为10 mg/L、吸附剂加入量为8 g/L、吸附时间为60 min时,Cd2+去除率达到98.55%;高炉渣对Cd2+的吸附符合拟二级动力学方程和Langmuir等温吸附模型,且吸附反应易发生。     

燃煤锅炉烟气脱硫废水处理技术研究进展

对目前国内外燃煤锅炉烟气脱硫废水处理的多种方法，如混凝－沉淀法、流化床法、人工湿地法、单质铁法、微滤膜法、生化法和改良混凝－沉淀法等进行了分析评述。研究发现，开发技术集成度大、流程短、药剂种类和用量少、一次性投资以及运营费用低的工艺技术是未来发展的方向，而改良混凝－沉淀法脱硫废水处理技术符合要求，是一项值得加强应用研究和推广的新技术。     

臭氧氧化处理页岩气钻井废水的机理与动力学

采用臭氧氧化法处理页岩气钻井废水经混凝沉淀后的出水(COD=759.63 mg/L),重点研究了废水中有机污染物的去除机理与反应动力学。实验结果表明:在废水pH为11.2、臭氧通入量为8 mg/min、反应时间为50 min的最佳工艺条件下,废水的COD去除率为42.51%;羟基自由基抑制剂CO_3~(2-)、HCO_3~-和叔丁醇的引入抑制了废水COD的臭氧氧化去除,尤其是叔丁醇的加入使COD去除率显著下降,说明废水中有机物的臭氧氧化去除过程遵循羟基自由基机理;臭氧氧化法对钻井废水中有机物的氧化去除过程符合表观二级反应动力学规律。     

Investigating the quantitative and qualitative status of effluent in the wastewater treatment plant in Iran Central Iron Ore

The aim of present study was to investigate the quality of the produced effluent from different units of the Iran Central Iron Ore in Bafq city and comparison of effluent with the standards. This study presents the physicochemical and biological parameters data of effluent of three Sequencing batch reactors (SBR) with a capacity of 160 m³?d^?1. Most common parameters include pH, total suspended solids (TSS), total nitrogen (TN), total phosphorus (TP), biochemical oxygen demand (BOD₅), chemical oxygen demand (COD), heavy metals, and total coliforms and fecal coliforms as biological indicators. Then, for each SBR system, the average of each parameter was determined, and results were compared with the standard recommended by the Iranian Environmental Protection Agency. Based on the results, some of the parameters, including BOD₅, COD, and TSS in the wastewater treatment plant (WWTP) effluent, are higher than the permitted amount for discharge to the surface water. Considering the BOD₅, COD, and TSS concentration in WWTPs, the treated wastewater is only suitable for agricultural and irrigation use. Therefore, wastewater produced by Iran Central Iron Ore Co. will need additional treatment to achieve standard quality of water before discharge in surface water and adsorbent well.     

榆林市某园区兰炭企业存在问题及解决对策

兰炭是榆林市的重要产业之一,但由于兰炭"粗放"的生产方式,对区域环境产生一定影响。为推进兰炭绿色健康发展,本文针对榆林市某园区内兰炭企业进行调研,了解该企业存在的主要问题,并提出相关建议。     

沈阳市某污水处理厂化学除磷的试验研究

某执行《城镇污水处理厂污染物排放标准》（GB18918-2002）二级排放标准的污水处理厂升级改造要达到一级A标准,其难点之一为改造后总磷达标。为此进行了化学除磷深度处理的单元试验研究,为污水处理厂升级改造除磷工作提供理论依据和数据支持。     

冷轧浓油废水预处理设施的设计与运行

就宝钢不锈钢有限公司配套建设的冷轧浓油废水处理工程的浓油废水预处理设施的设计与运行进行了介绍和分析,可作为相似工程中的借鉴和参考。     

工业废水的处理方法探讨

为实现水资源的循环利用与国民经济的可持续发展,必须对工业废水进行处理。在过去的几十年中,工业废水的任意排放给水资源环境和人民的身体健康带来了巨大的危害,为了杜绝这种现象的再次出现,本文对工业废水的处理方法做了如下的探讨。